How To Test Whirlpool Refrigerator Control Board
How To Test Whirlpool Refrigerator Control Board. This electronic control board (part number wpw10675033) is for refrigerators. 3) power on to refrigerator.
The main control board may be damaged, limiting or impeding the supply of power to the compressor. I found detailed instruction for checking the ohms on a ge control board, but can't find same for a whirlpool. So, if the whirlpool refrigerator is already under the defrosting function, the refrigerator’s test mode can be eliminated by just taking out the main plug and wait for thirty seconds.
Is My Next Step To Check The Control Board?
Genuine wpw10675033 whirlpool refrigerator electronic control board replacement part. Keeping this in consideration, how do i get my whirlpool refrigerator out of showroom mode? Within the refrigerator diagnostic test mode there are 6 diagnostic tests:
W10675033 Eap11757074 Ap6023728 W10811365 4449160 Ps11757074 W10852119.
Support the cover as you remove the last screw so it doesn’t fall. There are no tests you can really do with the board out unless you have a load jig to simulate loads. Whirlpool w10675033 / wpw10675033 refrigerator electronic control board.
2) Thermostat On 5 Seconds (Repeat Steps 1 & 2 Two More Times) 3) Thermostat Off.
Look for 24 vdc at the p3 and p4 connectors. I have a whirlpool side by side gd5rhaxnq00. You should feel heat coming out of the unit.
So, If The Whirlpool Refrigerator Is Already Under The Defrosting Function, The Refrigerator’s Test Mode Can Be Eliminated By Just Taking Out The Main Plug And Wait For Thirty Seconds.
I don't know which two traces (pin) to check and we don't have board schematics. Refrigerator pcb board appliance parts. Repair service for whirlpool refrigerator control board wp2307037;
You Can Tell The Defrost Timer Is Working By Feeling The Inside Of The Freezer.
The main control board may be damaged, limiting or impeding the supply of power to the compressor. Reconnect the power cord to the wall outlet. You can also try pulling the power to the refrigerator entirely and then plugging it back in, effectively “resetting” the device.
Post a Comment for "How To Test Whirlpool Refrigerator Control Board"