Antminer S9 C5 Control Board
Antminer S9 C5 Control Board. Show activity on this post. 18pin signal cable ,2*9 (2.0mm* 155mm) more info.
All 3 of the asic's appear to be in good shape, though each of the miners is only using a single asic board. If your control board s9 says crt0302, then for firmware via microsd, you will need to close the pins on it, as shown in this photo. To view the complete instructions, please read the article carefully:
We Can Identify The Appearance Of The Whole Miner:
Power on the control board and access the miner interface. As many as this, first test each board with a test tool. The first custom firmware with asicboost s9 saves up to 250w on pools that support asicboost technology (slushpool, antpool, btc.com, f2pool and others).
Antminer S9 Custom Firmware Download.
Easy and fast repair service here at repair center in the netherlands. So please contact us for more detailed information. When loaded, the red and green indicator lights on the control board will blink.
With The S9 Dual Concept, Two Antminers Can Run At A Total Of 20+Th/S At Just Above 1500W Power Usage.
In all other cases, including all. Control of the main motherboard antminer s9 control problems manual edge for bitmain antminer t9+ / s9/ s9i/ z9 mini/ z11 us: I have seen a dozen of antminer s9, never had a c5 version, and i assume they are rare, so you most likely have xilinx.
Just Get A Flashlight And Read What’s On The Big Chip.
Category mining hardware parts tags antminer hash board repair, antminer s17 hash. For antminer t9+, you can flash any model of the control board. I have 2 antminer s9's running.
Check The Kernel Log , There Is A Line Where It States The Control Board Type.
The default user and pass is root/root. Line s9 from the control board c5 is also impossible to flash. All 3 of the asic's appear to be in good shape, though each of the miners is only using a single asic board.
Post a Comment for "Antminer S9 C5 Control Board"